Chill Collar Project for 3D Young Innovators Project

Certain dog behaviors and habits posed a real challenge while we explored the designs. It was after a few trials and errors that we came out with our final product - the Chill Collar. It is inspired by the mechanics of two things we see all around - the wind socks and the wind spinners. Combining the characteristics of these mechanics, we created a dog-friendly design that simply attached to the dog’s collar. Soon, the dog took a run, and Chill Collar took shape!

a) Wire cable with connector

b) Multi-color, water-proof sheets , scale and scissors

c) Satin labels

d) Bi-directional spinner with a hook

e) Satin ribbons

f) Handheld Sewing Machine

g) Collar patch

Cut the waterproof sheet into a triangle.

Cut 10 cm -on the long side of the triangle.

Fold the top of the triangle and stitch it to make it a loop.

Perform same steps 1 -3 for other color sheets

Insert the wire cable and start connecting all the triangle color sheets on the top.

Stitch the bottom folded part together and attach the satin ribbons

Stitch the top part and attach the satin loop. along with the bi-directional spinner.

Hold it against the wind and check whether our device is spinning.

Attach to the dog’s collar, and the chill collar is ready!

Dog experience with Chill Collar