Gravitrax Episode 1 the Ultimate Starter Guide to Gravitrax and How to Get
by Knexmaster_792 in Living > Toys & Games
47 Views, 1 Favorites, 0 Comments
Gravitrax Episode 1 the Ultimate Starter Guide to Gravitrax and How to Get
Hi
Gravitrax is a ball track toy for Kids from 8 to 12 jears with many extensions and really fun to play
Lets Buy Gravitrax
What wou want to get is the gravitrax starter set from any shop but I would get it from amazon
Step 1 go to Google and type gravitrax starterset
Step 2 buy the gravitrax starterset. See the image ^^^
Step 3 wait for it to deliver
The Rails and Track Pieces
So you can connect the rails and the track
It is that easy
Parts:
Small rails: 1 block long. See picture
Medium rails: 2 blocks long. See picture
Long rails: 3 blocks long. See picture
A curve: sharp curve and gentle curve. See picture
A cross: see picture
And a example when combined
Special Parts
The booster: put 2 or 3 balls on 1 side and let another ball roll against it and on the side with 2 balls, the ball on the end wil get boosted. Only 1 time before reloading. See video
The start: push on the top to release 1 or 2 or 3 balls. Depends on how mutch you put in. See video.
The end. Just a end where the ball stops
Downloads
Raise the Track
You have these gray and black raisers. You have the gray, witch are a full block and the gray, witch are a half block. See picture
2 black is the same as 1 gray. See picture
you can stack these under all track connectors like in the picture
You can create a simple track with this see picture
What Are Those Green Hexagons on the Build Field?
The green hexagons on the buildfield is so you know where to place items.
A example:
Open the book and choose a track that you want to build. You could never know where to place the blocks if there where no green hexagons. So the purpose of those green hexagon are to guide you where to place the blocks. In the book are also these green hexagons so you can count them and place your block
The 3-Split Part
You can use this part to let 3 balls come together and all 3 balls go on 1 track.
Example: see the image
You can also make a race by using this green piece. See picture, to see witch one wins the race. Warning: you can only place that green part on the end of the 3-split. Nowhere else otherwise it will break
Hole Parts
So we have these hexagon shaped hole parts. See picture. But you can actully put a lot inside them. See picture.
1 the slope: you can put this under all platform (i wil explain that later) and if a ball falls down, it can land in the slope and go rolling again. See video
2 the tunnel: you can put this on top of a platform (explain later) and the ball will roll in, and drop down (on the slope)
3 the 3 exit: you can put this under a platform (later) and on the platform a funnel (explain later) or a tunnel. Put 3 balls on the 3 exit and when the ball falls down, all 3 balls wil roll. See video
Platforms
This is what a platform looks like. See picture
You can place a platform on top of pillars. See picture
You cant place blocks under the platform but you can place blocks on the ground under the platform
You can place anything you like on the platform. See picture
You can stack platforms on top. See picture
Some other things. See picture
Switches and Funnels
First the switches
A switches is for switching the track. See video
You can remove the green part from the switch. See picture
Now the funnels
A funnel looks like a tunnel. The part we used before
But it spins a bit. See video
Tips and Tricks
Tip 1
If you build high up, never go straight down with one track.
Go not to steep. Otherwise the track will not connect.
Tip 2
If you have a fast track, never use a sharp curve otherwise the ball wil fly out of control
Tip 3
When building, never let your balls roll around. Store them in a case or box