Laser Cut Colorado Board

Basic Laser-Cut Colorado Flag

Laser Cutter, 3mm Baltic Birch, Wood Glue, Hot Glue Gun and sticks, Stain/Paint, Magnets X2, Clamps, sacrificial sheet of wood for gluing.

Using given DXF, part files, or drawing file, create a laser cut of the backboard for the flag.

Using given DXF, part files, or drawing file, create a laser cut of the top layer for the flag (upper and lower blue bars, C, and sun).

Once all parts of the flag are laser cut out, sand down burns if present, and paint/stain to desired color of Colorado flag.

Once all parts are painted/stained and dried, use a small amount of wood glue to assemble individual pieces of flag into the complete assembly. Clamp assembly down to dry and place a flat buffer sheet between the clamp and flag assembly on both sides.

Once the completed assembly has fully dried and cured into a solid flag, evenly place and hot glue two magnets to backside to stick to a fridge if desired.