Laser Cut Perpetual Tissue Box

A tea light holder is a simple way to add warmth and charm to your home. Even a small candle can create a cozy, inviting glow when placed in a wooden holder. With a laser cutter, you can make a precise, beautifully cut holder without needing advanced woodworking skills.

This step-by-step tutorial is designed for beginners with no prior laser experience, explaining every detail so you can confidently create your own wooden tea light holder.

Machine Used

Thunder Bolt 30W

See more details about this machine→

Material Needed

3mm Plywood

Settings

Cutting Plywood

1. Speed:10mm/s
2. Max Power:25%
3. Min Power:10%
4. Number of Passes:1

● Use a smooth wooden board suitable for laser cutting (e.g., birch or maple, 3 mm thick).

● Place the wood flat on your laser cutter bed. Ensure the surface is clean and free of dust or oils. Fingerprints can sometimes burn slightly during engraving, leaving dark marks.

Open your laser software(I use LaserMaker) and import the design file into your laser software. Adjust the layout so it fits properly within your material size. Before moving on, double-check your engraving and cutting parameters to match the thickness and type of wood you’re using.

Proper focusing ensures neat, polished edges. If your machine has auto focus, use it for quick setup. For manual focusing, lower the laser head with the focus stick until it touches the wood surface at a perfect angle. Always double-check before cutting.

Then click “Frame” or “Border” to preview your cutting area and make sure the design fits nicely on your board. This confirms your material placement and avoids wasting wood. Adjust as necessary. Once everything is set, start the laser job.

Stay close to the machine while it’s running and watch the cutting and engraving progress. Keep an eye out for excessive smoke, small flame-ups, or any movement of the material that could affect the outcome. Make sure your workspace is well-ventilated, and rely on air assist if available to achieve cleaner edges on the wood.

Once all pieces are cut, remove them from the laser bed. Align the panels and assemble the tissue box according to the design. Use glue if needed to secure the joints firmly.

Your wooden tissue box is now complete. Check the structure for stability, wipe off any residue, and it’s ready to be used on your desk or table.