Lego Stronger Enderman

by Prismarine soldier 123456 in Living > LEGO & K'NEX

1738 Views, 1 Favorites, 0 Comments

Lego Stronger Enderman

IMG_20200606_121241.jpg
IMG_20200606_121452.jpg
I know many of you like minecraft and its endermen. Would you like to see them stronger? Then this is your chance!!!

Parts Needed

IMG_20200606_123203.jpg
You will need a whole lego enderman holding an iron block, 2 ender perls and some others featured in the photos of the step. Only two parts of the iron block won't be used.

IMG_20200606_123315.jpg
Leave only the body main brick and the head of the Enderman at place.

First Block Layer

IMG_20200606_123410.jpg

Second Block Layer

IMG_20200606_123526.jpg
IMG_20200606_123550.jpg

Third Block Layer

IMG_20200606_123610.jpg
IMG_20200606_123623.jpg

Fourth Block Layer

IMG_20200606_123639.jpg
IMG_20200606_123709.jpg

Fifth Block Layer

IMG_20200606_123723.jpg
IMG_20200606_123737.jpg

Sixth Block Layer

IMG_20200606_123745.jpg
IMG_20200606_123759.jpg

Seventh Block Layer

IMG_20200606_123832.jpg
IMG_20200606_123847.jpg

Chest

IMG_20200606_124925.jpg
IMG_20200606_124949.jpg
IMG_20200606_125019.jpg
IMG_20200606_125040.jpg
IMG_20200606_125116.jpg
IMG_20200606_125140.jpg
IMG_20200606_125216.jpg
Now use the ender perls and the iron block parts as above.

Arms

IMG_20200606_125234.jpg

Attaching Block

IMG_20200606_125326.jpg
IMG_20200606_125339.jpg

Conclusion

IMG_20200606_121452.jpg
IMG_20200606_121241.jpg
I cannot wait to see your comments on this! Colours on the block can be changed but some parts should remain the same and in the same position so that the enderman's hands won't open more than needed and therefore not holding the block well. If you have anything better, feel free to share it with me!