Wire Ring Double Band

I made a ring out of wire for fun

0.8 mm wire

small bead

wire cutters

something round (I used a ring sizer)

pliers

Cut a really long length of wire

Make sure the bead is on the centre of the wire

Make sure you have several loops around the bead until the wires are parallel again, then secure them with one twist.

Twist the wire together

Wrap twice around round thing to make ring band, then cross the bead over so it is in the middle. Make sure the wires cross in the back

With the little bit at the end twist once around the wires to secure together, then wrap around the bead, tuck the end in