Knex Gun With New Trigger & Sear System

Assault rifle

Connectors:
31 red/dark grey
22 green
14 white/black
10 purple/silver
4 orange/brown
1 tan/dark tan clip
51 yellow/ light grey
16 grey clip
11 special black arm things
2 blue
12 blue spacers

Rods:
2 black (rigid)
5 grey (flexible)
22 blue
20 white/silver
10 yellow/dark grey
4 red/tan
33 green/black pegs

Firing Pin

self explanatory 3 dark grey connectors, 1 rigid black piece and a tan clip

Back of Gun

some of the pics a re a little bright sorry about that

Handle

enter longer description for this step

Trigger

enter longer description for this step

Scope & Trigger Slide

enter longer description for this step

Barrel

enter longer description for this step

Body & Body/ Back of Gun Connector

make 2 of these and you will also need 2 blue rods to connect them

Front Handle Grip

Putting It All Together

pic 1 attach body/back of gun connector to the body
pic 2 attach sear to the body
pic 3 attach back of gun to body/back of gun connector
pic 4 attach firing pin slide to body and back of gun and insert the firing pin
pic 5 insert trigger
pic 6 attach handle to body
pic 7 attach front handle grip to the barrel
pic 8 attach the front handle grip and barrel to the body
pic 9 attach scope to barrel

Attaching Rubberbands

pic 1 wrap rubberband around front of scope
pic 2 wrap the same rubberband from pic 1 to the firing pin
pic 3 wrap another rubberband on the sear as shown
pic 4 wrap the same rubberband from pic 3 as shown

This the Sear Sorry About That

enter longer description for this step