<?xml version="1.0" encoding="utf-8"?>
<!DOCTYPE eagle SYSTEM "eagle.dtd">
<eagle version="6.5.0">
<drawing>
<board>
<plain>
<wire x1="0" y1="0" x2="82.55" y2="0" width="0" layer="20"/>
<wire x1="82.55" y1="0" x2="82.55" y2="71.12" width="0" layer="20"/>
<wire x1="82.55" y1="71.12" x2="0" y2="71.12" width="0" layer="20"/>
<wire x1="0" y1="71.12" x2="0" y2="0" width="0" layer="20"/>
</plain>
<libraries>
<library name="adafruit">
<packages>
<package name="ARDUINOR3">
<description>The new Arduino R3 'classic' adds duplicate I2C pins and an IORef pin (and an unused pin</description>
</package>
<package name="TO92-EBC-OVAL">
<description>&lt;b&gt;TO-92&lt;/b&gt;&lt;p&gt;
grid 5.08 mm</description>
</package>
</packages>
</library>
<library name="SparkFun-Connectors">
<description>&lt;h3&gt;SparkFun Electronics' preferred foot prints&lt;/h3&gt;
In this library you'll find connectors and sockets- basically anything that can be plugged into or onto.&lt;br&gt;&lt;br&gt;
We've spent an enormous amount of time creating and checking these footprints and parts, but it is the end user's responsibility to ensure correctness and suitablity for a given componet or application. If you enjoy using this library, please buy one of our products at www.sparkfun.com.
&lt;br&gt;&lt;br&gt;
&lt;b&gt;Licensing:&lt;/b&gt; Creative Commons ShareAlike 4.0 International - https://creativecommons.org/licenses/by-sa/4.0/ 
&lt;br&gt;&lt;br&gt;
You are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage.</description>
<packages>
<package name="1X07_LOCK">
</package>
<package name="1X02">
</package>
</packages>
</library>
<library name="SparkFun-Electromechanical">
<description>&lt;h3&gt;SparkFun Electronics' preferred foot prints&lt;/h3&gt;
In this library you'll find anything that moves- switches, relays, buttons, potentiometers. Also, anything that goes on a board but isn't electrical in nature- screws, standoffs, etc.&lt;br&gt;&lt;br&gt;
We've spent an enormous amount of time creating and checking these footprints and parts, but it is the end user's responsibility to ensure correctness and suitablity for a given componet or application. If you enjoy using this library, please buy one of our products at www.sparkfun.com.
&lt;br&gt;&lt;br&gt;
&lt;b&gt;Licensing:&lt;/b&gt; Creative Commons ShareAlike 4.0 International - https://creativecommons.org/licenses/by-sa/4.0/ 
&lt;br&gt;&lt;br&gt;
You are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage.</description>
<packages>
<package name="1X03">
</package>
</packages>
</library>
<library name="SparkFun-DiscreteSemi">
<description>&lt;h3&gt;SparkFun Electronics' preferred foot prints&lt;/h3&gt;
In this library you'll find discrete semiconductors- transistors, diodes, TRIACs, optoisolators, etc.&lt;br&gt;&lt;br&gt;
We've spent an enormous amount of time creating and checking these footprints and parts, but it is the end user's responsibility to ensure correctness and suitablity for a given componet or application. If you enjoy using this library, please buy one of our products at www.sparkfun.com.
&lt;br&gt;&lt;br&gt;
&lt;b&gt;Licensing:&lt;/b&gt; Creative Commons ShareAlike 4.0 International - https://creativecommons.org/licenses/by-sa/4.0/ 
&lt;br&gt;&lt;br&gt;
You are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage.</description>
<packages>
<package name="DIODE-1N4001-KIT">
</package>
</packages>
</library>
<library name="SparkFun-Passives">
<description>&lt;h3&gt;SparkFun Electronics' preferred foot prints&lt;/h3&gt;
In this library you'll find resistors, capacitors, inductors, test points, jumper pads, etc.&lt;br&gt;&lt;br&gt;
We've spent an enormous amount of time creating and checking these footprints and parts, but it is the end user's responsibility to ensure correctness and suitablity for a given componet or application. If you enjoy using this library, please buy one of our products at www.sparkfun.com.
&lt;br&gt;&lt;br&gt;
&lt;b&gt;Licensing:&lt;/b&gt; Creative Commons ShareAlike 4.0 International - https://creativecommons.org/licenses/by-sa/4.0/ 
&lt;br&gt;&lt;br&gt;
You are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage.</description>
<packages>
<package name="AXIAL-0.3EZ">
<description>This is the "EZ" version of the standard .3" spaced resistor package.&lt;br&gt;
It has a reduced top mask to make it harder to install upside-down.</description>
</package>
</packages>
</library>
</libraries>
<attributes>
</attributes>
<variantdefs>
</variantdefs>
<elements>
<element name="U1" library="adafruit" package="ARDUINOR3" value="ARDUINOR3-DIMENSION"/>
<element name="X1" library="SparkFun-Connectors" package="1X07_LOCK" value="RGB Color Sensor"/>
<element name="M1" library="SparkFun-Electromechanical" package="1X03" value="SMALL_SERVO"/>
<element name="M2" library="SparkFun-Electromechanical" package="1X03" value="SMALL_SERVO"/>
<element name="M3" library="SparkFun-Electromechanical" package="1X03" value="SMALL_SERVO"/>
<element name="T1" library="adafruit" package="TO92-EBC-OVAL" value="TIP120G"/>
<element name="T2" library="adafruit" package="TO92-EBC-OVAL" value="TIP120G"/>
<element name="D1" library="SparkFun-DiscreteSemi" package="DIODE-1N4001-KIT" value=""/>
<element name="D2" library="SparkFun-DiscreteSemi" package="DIODE-1N4001-KIT" value=""/>
<element name="R1" library="SparkFun-Passives" package="AXIAL-0.3EZ" value="1KΩ"/>
<element name="R2" library="SparkFun-Passives" package="AXIAL-0.3EZ" value="1KΩ"/>
<element name="X3" library="SparkFun-Connectors" package="1X02" value="FAN 1"/>
<element name="X2" library="SparkFun-Connectors" package="1X02" value="FAN 2"/>
</elements>
<signals>
<signal name="VIN">
<contactref element="U1" pad="VIN"/>
</signal>
<signal name="GND2">
<contactref element="U1" pad="GND2"/>
</signal>
<signal name="3V">
<contactref element="U1" pad="3V"/>
</signal>
<signal name="N$3">
<contactref element="U1" pad="D6"/>
<contactref element="M2" pad="1"/>
</signal>
<signal name="N$4">
<contactref element="U1" pad="D3"/>
<contactref element="M1" pad="1"/>
</signal>
<signal name="N$5">
<contactref element="U1" pad="D8"/>
<contactref element="R2" pad="P$2"/>
</signal>
<signal name="N$6">
<contactref element="U1" pad="D9"/>
<contactref element="M3" pad="1"/>
</signal>
<signal name="SDA">
<contactref element="U1" pad="SDA"/>
<contactref element="X1" pad="5"/>
</signal>
<signal name="SCL">
<contactref element="U1" pad="SCL"/>
<contactref element="X1" pad="4"/>
</signal>
<signal name="PWR">
<contactref element="X1" pad="1"/>
<contactref element="U1" pad="5V"/>
<contactref element="M3" pad="2"/>
<contactref element="D2" pad="C"/>
<contactref element="X2" pad="1"/>
<contactref element="D1" pad="C"/>
<contactref element="X3" pad="1"/>
<contactref element="M1" pad="2"/>
<contactref element="M2" pad="2"/>
</signal>
<signal name="N$7">
<contactref element="U1" pad="D7"/>
<contactref element="R1" pad="P$2"/>
</signal>
<signal name="N$1">
<contactref element="U1" pad="GND"/>
<contactref element="X1" pad="2"/>
</signal>
<signal name="GND">
<contactref element="M1" pad="3"/>
<contactref element="M2" pad="3"/>
<contactref element="M3" pad="3"/>
<contactref element="T1" pad="E"/>
<contactref element="T2" pad="E"/>
<contactref element="U1" pad="GND1"/>
</signal>
<signal name="N$2">
<contactref element="R2" pad="P$1"/>
<contactref element="T1" pad="B"/>
</signal>
<signal name="N$8">
<contactref element="R1" pad="P$1"/>
<contactref element="T2" pad="B"/>
</signal>
<signal name="N$9">
<contactref element="X2" pad="2"/>
<contactref element="D2" pad="A"/>
<contactref element="T1" pad="C"/>
</signal>
<signal name="N$10">
<contactref element="D1" pad="A"/>
<contactref element="T2" pad="C"/>
<contactref element="X3" pad="2"/>
</signal>
</signals>
</board>
</drawing>
</eagle>
